how to calculate average of car

Created with Sketch.

how to calculate average of car

 

How to Calculate Average Fuel Efficiency of Your Car

What Does “Average of Car” Mean?

To most people, the average of the car refers to the efficiency or mileage of the vehicle over a given distance. It is a way of estimating how many kilometers (or miles) your car can move using a liter (or gallon) of fuel. This computation is important in as much as a vehicle’s fuel economy is important in determining the cost of road trips, fuel expenditure, and an assessment of the car itself.

Fuel efficiency is commonly measured in:

  • Kilometers per liter (km/l) or miles per gallon (mpg) in countries that operates on the metric system.
  • Miles per gallon (mpg) as observed in countries with an imperial system (for example, the United States).

How To Determine the Average Fuel Economy of a Car?

There are two pieces of information required to determine the average fuel economy or average mileage of your vehicle:

  • Distance Driven: Mileage accrued (the distance in kilometers or miles).
  • Fuel Usage: The quantity of fuel consumed (in liters or gallon).

The average fuel economy formula is contained in the following manner:

Average fuel efficiency = Distance traveled / Fuel consumed

Or,

Average fuel efficiency = Fuel consumed / Distance traveled

Here is a breakdown of the steps to calculate this:

Step 1: Fill Up Your Tank

First, fill in your fuel tank to full capacity. This will enable you to easily calculate the expense incurred in driving from this tank filling to the next time the tank is filled again.

Make sure that you’ve filled in the necessary data in terms of the trip meter or take the odometer data prior to you starting the journey.

If you don’t have a trip meter, you can use the odometer reading at the start of your journey.

Step 2: Drive Your Car The Eco-Friendly Way

During this stage, you will be engaging in driving that is undertaken in a relaxed manner, this could range from taking a short trip over a span of several days to a taking a road trip. In order to achieve greater accuracy, you might want to monitor the fuel consumption over a specific distance.

Step 3: Gage the Fuel Used as you Refuel

Head to the fuel station when you are reminiscing how you were able to see your last blanks fuel indicator mark. At this point, keep track of the fuel consumed (this can easily be seen posted on a fuel pump or receipt), the distance travelled, and the starting point.

For this instance, assume you drove a distance of let’s say 30 kilometers and took fuel gage readings. Then resting consumption will be as follows:

  • Distance Covered: 300km
  • Fuel Consumed: 30 Liters

Step 4: Find the Fuel Efficiency Automata Average Stepwise

Average Fuel Efficiency (km/l) = Distance traveled / Fuel consumed

In your example, these values will assist you in evaluating:

Average Fuel Efficiency = 300km / 30l

So, achieving the objective of evaluating the average fuel efficiency consumed, none the less is achieved. The automobile consumes in average 10 kilometers compensating for one liter, hence fuel efficiency is set to.

Step 5: Check for Accuracy

According to fuel consumption surveys, repeating this procedure during several trips might be useful to achieve more accurate results. This takes into consideration fuel efficiency variations that occur from road conditions to driving styles and more.

Example Calculation

Let’s go through one more example to make the process a bit clearer:

First Trip:

  • Distance Traveled: 150 km
  • Fuel Consumed: 12 liters

Average Fuel Efficiency = 150 / 12 = 12.5 km/l

Second Trip:

  • Distance Traveled: 200 km
  • Fuel Consumed: 16 liters

Average Fuel Efficiency = 200 / 16 = 12.5 km/l

Taking the average over several trips will give you a more accurate measure of your car’s fuel efficiency.

Factors That Affect Your Car’s Average Fuel Efficiency

There are different factors that can impact the fuel efficiency of your car and consequently change the average fuel rate:

  • Driving Habits: Fuel efficiency can be greatly reduced by aggressive driving such as speeding, rapid acceleration, and heavy braking.
  • Traffic Conditions: The average fuel efficiency is expected to drop while driving in stop-and-go traffic as compared to long drives on an uninterrupted highway.
  • Car Condition: A fuel-efficient car is one that is properly maintained. More servicing, air filter changes, capturing tire pressure, and oil use can all contribute to enhanced fuel economy effectiveness.
  • Road Conditions: Elevated or unsurfaced terrains can be detrimental to fuel economy, whereas well-maintained highway roads tend to increase fuel efficiency.
  • Load and Weight: Maintaining heavy loads or carrying roof racks can impact fuel economy effectiveness negatively because the engine has to make more effort to support extra weight, or additional wind drag.
  • Weather: Atmospheric conditions such as extreme cold may have a negative impact on fuel economy, as it increases the duration of engine warm-up, as well as air conditioning and heater usage.
  • Type of Fuel: The impact fuel quality and type have on mileage cannot be ignored. Premium fuels will not improve mileage in situations where a car does not need it.

What is the Ideal Average Fuel Efficiency?

Factors such as the car being handled, attitude while driving, and the type of asphalt being driven on determines an estimated average fuel efficiency. For some specific segments of vehicles, here are some norms:

  • Compact cars: 12 to 20 km/l (kilometers per liter) is broadly expected.
  • Sedans: 10 to 15 km/l is broadly expected.
  • SUVs: Have a relatively poor efficiency which lies between 8 to 12 kilometers per liter.
  • Hybrid cars: Can get much better efficiency, commonly achieves between 20 to 25 kilometers per liter or more.

It is important because if the fuel consumption of your automobile is lesser than the standards set for it, there are various concerns such as pressure in the tires, the air filter might need cleaning, or there might be other repairs to be done.

Benefits from Knowing Average Efficiency Consumption of Fuel of your Vehicle

  • Cost Management: Making an approximation of expenses on trips can be simplified if users are aware of how economical their car is on fuel.
  • Environmental impact: Lower consumption of fuel means lower emissions. Choosing an energy-efficient vehicle may be beneficial in accomplishing the goal. Improving fueling economy reduces my carbon footprint.
  • Maintenance Indicator: Mileage should not drop down suddenly. It often means that there is a mechanical issue which needs addressing.
  • Trip Planning: Knowing the mileage one can expect from a particular quantity of fuel will assist in planning outings, particularly in places that don’t have sufficient sources of fuel stations.

FAQs

Is it possible for me to derive the average fuel consumption for a specific ride?

Certainly, you may do so for a specific ride, however, a more accurate result can be gotten from calculating the averages over several rides.

Does fuel type make a difference when determining fuel efficiency?

Yes, certain vehicles may perform better with premium fuel, but the difference is usually negligible when talking about the bigger picture.

What could be the reason that my vehicle fuel consumption is increasing year after year?

Prolonged use of the car will organically result in reduced efficiency as the engine wears out, driving patterns change or maintenance level goes down.

At what intervals do I need to track the fuel consumption of my car?

It is advisable to monitor your fuel consumption on a regular basis, especially when there is a noticeable increase in consumption or if there are plans for an extended trip.

Can a driver’s behavior give the car’s average fuel efficiency a boost?

Yes, for sure! Aggressive driving, leading to frequent high-speed driving and high RPM’s give the worst fuel consumption figures. Fuel is saved best when steady speed is used.

Conclusion

For a casual vehicle owner, one of the easiest ways to keep track of the performance of your vehicle, control fuel costs, and make sure it is in proper working condition is to calculate the fuel efficiency of your car. If a close eye is kept on fuel used by the car, keeping track of and following the steps in this guide will allow you to understand better how the vehicle operates and what can be done to improve the mileage of the vehicle. However, it is important to understand that driving habits, maintenance, and road conditions play a big role in fuel economy. If measured as such, the fuel efficiency ratio would be a vac beneficial parameter to consider taking into account.